IBM DTCA-24090 Hard Drive Specifications - Page 13
General Features
View all IBM DTCA-24090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2.0 General Features 2.5-inch, 12.5mm Height MCC Compliance 4090MB / 3240MB formatted capacity 512 bytes/sector AT Interface (Enhanced IDE) conforming to ATA-3 Integrated controller No-ID recording format PRML channel Multi Zone Recording Enhanced ECC − On The Fly correction : 9 Bytes/sector − Offline correction : 12 Bytes/sector 468KB Buffer for Read and Write Host data transfer speed. − 16.6 MB/sec : PIO Mode-4 − 33.3 MB/sec : Ultra DMA Mode-2 Media data transfer rate 83.4 (outer zone) - 51.7 (inner zone) Mbit/sec Average seek time 13 milliseconds for read Closed-loop actuator servo (Embedded Sector Servo) Rotary voice coil motor actuator Load / Unload mechanism Adaptive power save control (0.65 Watt at low-power idle state) 2.8 sec Power on to ready Shock − Non-operation : 600G/2ms − Operation : 100G/2ms Note: Mounting screw position is − Compatible with DTNA-2xxxx, DLGA-2xxxx, DDLA-2xxxx, DPLA-2xxxx. − Incompatible with DMCA-2xxxx, DCRA-2xxxx, DSOA-2xxxx, DPRA-2xxxx, DBOA-2xxx. © Copyright IBM Corp. 1997 5