IBM DTCA-24090 Hard Drive Specifications - Page 87
Operation example
View all IBM DTCA-24090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
The system manufacturer/dealer who intends to enable the device lock function for the end users, must set the master password even if only single level password protection is required. Otherwise, the 'default' master password which is set by IBM can unlock the device which is locked with user password. 10.7.4 Operation example 10.7.4.1 Master Password setting The system manufacturer/dealer can set a new Master Password from default Master Password using the Security Set Password command, without enabling the Device Lock Function. 10.7.4.2 User Password setting When a User Password is set, the device will automatically enter lock mode the next time the device is powered on. < Setting password > POR V Set Password with User Password V Normal operation V Power off POR > Device locked mode Figure 49. Initial Setting ( Ref.) < No setting password > POR V Normal operation V Power off POR > Device unlocked mode General Operation Descriptions 79