IBM DTCA-24090 Hard Drive Specifications - Page 139
Identifier, DTCA-24090, DTCA-23240
View all IBM DTCA-24090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Identifier Zero indicates that the device should check the supplied password against the user password stored internally. One indicates that the device should check the given password against the master password stored internally. The Security Erase Unit command erases all user data and disables the security mode feature (device lock function). So after completing this command, all user data will be initialized to zero with write operation. At this time, it is not verified with read operation whether the sector of data is initialized correctly. Also, the defective sector information and the reassigned sector information for the device are not updated. The security erase prepare command should be completed immediately prior to the Security Erase Unit command. If the device receives a Security Erase Unit command without a prior Security Erase Prepare command the device aborts the security erase unit command. This command disables the security mode feature (device lock function), however the master password is still stored internally within the device and may be re-activated later when a new user password is set. If you execute this command on disabling the security mode feature (device lock function), the password sent by the host is N O T compared with the password stored in the device for both the Master Password and the User Password, and then the device only erases all user data. The execution time of this command is shown below. DTCA-24090 DTCA-23240 14 min 12 min Command Descriptions 131