Icom IC-T70A HD Instruction Manual - Page 11
Keypad
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PANEL DESCRIPTION 2 r VOLUME CONTROL [VOL] ➥ Adjust the audio volume level. (p. 16) ➥ During set mode operation, rotate to select the options. (p. 51) t PTT SWITCH [PTT] ➥ Push and hold to transmit, release to receive. (p. 23) For IC-T70E only ➥ Push briefly, then push and hold to transmit a 1750 Hz tone burst. (p. 28) y EXTERNAL DC IN JACK [DC IN] ➥ Connects the supplied wall charger, BC-167S, to charge the attached battery pack, BP-264. (p. 12) • The transceiver can charge only the BP-264 Ni-MH battery pack. Charging the BP-265 Li-Ion battery pack requires the BC-193 desktop charger. ➥ Connect an external DC power supply through the optional CP-12L, CP-19R or OPC-254L for external DC operation. (p. 15) D Keypad 1 2 3 4 5 6 ➥ Push to input numbers for frequency input or memory 7 channel selection. 8 ➥ While continuing to push [PTT], push the key to send the DTMF code. (pp. 66, 67) 9 • [0]-[9] send "0"-"9," [A](SET) sends "A," [B](BAND) sends "B," 10 [C](H/M/L) sends "C," [D](V/M/C) sends "D," [M](DUP) sends "M (E)" and [#](T.SCAN) sends "# (F)." 11 POWER KEY [ ] 12 ➥ Push and hold for 1 sec. to turn the transceiver 13 power ON or OFF. (p. 16) 14 VFO/MEMORY/CALL • SELECT MEMORY WRITE KEY [V/M/C] • [S.MW](V/M/C) 15 ➥ Push to select the VFO mode, memory mode, call 16 channel mode or weather channel mode*. (pp. 18, 29, 30, 72) 17 *Only for the U.S.A. version transceiver. 18 ➥ Push and hold for 1 sec. to enter select memory write mode. (p. 31) 19