Icom IC-T70A HD Instruction Manual - Page 46
Erasing/transferring bank contents
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6 MEMORY/CALL CHANNELS ■ Erasing/transferring bank contents The bank contents of programmed memory channels can be cleared or reassigned to another memory bank. INFORMATION: Even if the memory bank contents are cleared, the memory channel contents still remain programmed. • Do not hold [S.MW](V/M/C) for more than 2 seconds. Otherwise the memory contents will be copied to the VFO. e P ush [SET] repeatedly to select "bAnk." q S elect a desired bank's contents to be transferred or erased from the bank. (p. 33) ➥ Push [BAND] to enter the memory bank selection mode. ➥ Rotate [DIAL] to select a desired memory bank group, then push [BAND]. ➥ Rotate [DIAL] to select the bank channel. [DIAL] r P ush [BAND] to toggle the bank channels selection or the bank group selection. t R otate [DIAL] to select a desired bank group or channel to be transferred. Or, select the display when erasing the contents from the bank. To transfer the bank contents [DIAL] to ch 11 in Bank b. w P ush [S.MW](V/M/C) for 1 sec. to enter the select memory write mode. • 1 short and 1 long beep sounds. • Automatically displays the original memory channel number, and then the " " icon and memory channel number blink. 39 Bank channel is displayed. To erase is displayed. y P ush [S.MW](V/M/C) for 1 sec. to erase/transfer the bank contents.