Icom IC-T70A HD Instruction Manual - Page 26
Setting the tuning step, Setting the frequency
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4 BASIC OPERATION ■ Setting the tuning step The tuning step can be selected for both band. The following tuning steps are available for the IC-T70A/T70E. • 5.0 kHz • 10.0 kHz • 12.5 kHz • 15.0 kHz • 20.0 kHz • 25.0 kHz • 30.0 kHz • 50.0 kHz • 100.0 kHz • 125.0 kHz • 200.0 kHz D Tuning step selection q In the VFO mode, push [BAND] to select the desired frequency band. • If you are in another mode, such as a memory channel/call channel mode or the weather channel mode, push [V/M/C] to select the VFO mode first, then push [BAND] to select the desired band. w P ush [SET] to enter the Set mode. e R otate [DIAL] to select the tuning step set item, then ro- tate [VOL] to select the desired tuning step. r Push [V/M/C] to return to the VFO mode. [DIAL] [VOL] ■ Setting the frequency D Using the dial q P ush [V/M/C] to select the VFO mode, if any other mode is selected. w P ush [BAND] to select the desired frequency band. e Rotate [DIAL] to select the desired frequency. • The frequency changes according to the preset tuning steps. See the previous topic to set the tuning step. [DIAL] • 144 MHz band Push [BAND] • 440 MHz band 5 kHz tuning step 19 [DIAL] changes the frequency according to the selected tuning step.