Icom IC-T70A HD Instruction Manual - Page 36
Memory/call Channels
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
6 MEMORY/CALL CHANNELS ■ General description The IC-T70A/T70E has 300 memory channels, and 2 call channels. Memory channels include 50 scan edge memory channels (25 pairs) to store often-used frequencies. Also, 26 memory banks, A to Z, are available in each band for storing groups of frequencies, etc. Up to 100 channels can be assigned to a bank. D Memory channel contents The following information can be programmed into memory channels: • Operating frequency (p. 20) • Operating mode (p. 21) • Duplex direction (+DUP or -DUP) with a frequency offset (p. 26) • Reverse duplex function ON/OFF (p. 26) • Subaudible tone encoder (p. 24), tone squelch or DTCS squelch ON/OFF (p. 70) • Subaudible tone frequency (p. 53), tone squelch fre- quency or DTCS code with polarity (p. 53) • Scan skip setting (p. 46) • Memory bank (p. 32) • Memory name (p. 34) • Tuning step (p. 19) • Output power (p. 22) ■ Selecting a call channel q P ush [V/M/C] to select the call channel mode. • Pushing [V/M/C] toggles between the VFO mode, the memory channel mode, call channel mode and weather channel mode*. *Only the U.S.A. version transceiver. w R otate [DIAL] to select a desired call channel. • "C0" and "C1" are selectable. [DIAL] VHF band call channel UHF band call channel NOTE: Memory data can be erased by static electricity, electric transients, etc. In addition, it can be erased by malfunction and during repairs. Therefore, we recommend that memory data be written down or be saved to a PC using the CS-T70 cloning software. 29