Icom IC-T70A HD Instruction Manual - Page 25
Selecting the mode
![]() |
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
BASIC OPERATION 4 ■ Selecting the mode q P ush [V/M/C] repeatedly to sequentially select the VFO mode, memory mode, call channel mode or weather channel mode*. *Only for the U.S.A. version transceiver. w R otate [DIAL] to change the frequency or select a desired channel. [DIAL] D VFO mode The VFO mode is used to set the desired frequency. • VFO mode display What is VFO? VFO is an abbreviation of Variable Frequency Oscillator. Frequencies for both transmitting and receiving are generated and controlled by the VFO. 1 D Memory mode 2 Memory mode is used for opera- • Memory mode display 3 tion on memory channels which store programmed frequencies. 4 • " " appears when memory mode is selected. • Only programmed memory chan- 5 Appears 6 nels can be selected. 7 • Enter the channel number directly to select the desired memory channel. (p. 30) 8 9 D Call channel mode 10 Select a call channel to operate • Call channel display on one of your two most often- 11 used frequencies. 12 • "C0" or "C1" appears instead of the memory channel number when the 13 Call channel mode is selected. 14 D Weather channel mode* 15 There are 10 weather channels • Weather channel display 16 for monitoring weather broadcasts from NOAA (National 17 Oceanic and Atmospheric Ad- 18 ministration). *Only for the U.S.A. version transceiver. 19 18
![](/manual_guide/products/icom-ict70a-e-instruction-manual-08e11d5/25.png)