Icom IC-T70A HD Instruction Manual - Page 67
Display backlighting LIGHT, Beep output level BEEPLV, Auto repeater AUTORP
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
SET MODES 9 D Display backlighting (LIGHT) The transceiver has a display backlighting with a 5 second timer for night time operation. The display backlighting can be turned ON continuously or turned OFF. (default: Auto1) • OFF : The backlight is turned OFF. • On : The backlight is continuously ON. • Auto1 : Lights when an operation is performed, then goes out after 5 seconds. • Auto2 : Lights when an operation is performed, then goes out after 5 seconds with a battery pack or battery case, or stays ON when using the external power supply (more than 10 V DC). D Beep output level (BEEPLV) Turns the key-touch beep ON or OFF. Sets the beep sound level to between 1 and 9. (default: 4) 1 D Auto repeater (AUTORP) 2 U.S.A. and Korean versions only 3 The auto repeater function automatically turns the duplex op- 4 eration and tone encoder ON or OFF. The offset and repeater tone settings are not changed by the auto repeater function. 5 Reset these frequencies, if necessary. 6 U.S.A. version: 7 • OFF : The auto repeater function is turned OFF. • R1 : Activates for duplex only. (default) 8 • R2 : Activates for duplex and tone. 9 10 11 Korean version: 12 • OFF : The auto repeater function is turned OFF. 13 • On : Activates for duplex and tone. (default) 14 15 16 17 18 19 60