Icom IC-T70A HD Instruction Manual - Page 35
Hz tone
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
5 REPEATER AND DUPLEX OPERATIONS ■ 1750 Hz tone To access some European repeaters, the transceiver must transmit a 1750 Hz tone burst. For such repeaters, perform the following. • This tone can be use as a 'Call signal' in countries out of Europe. q P ush [SET] to enter the Set mode. w R otate [DIAL] to select the DTMF key item, then rotate [VOL] to set to "t-CALL." [DIAL] [VOL] DTMF key setting Tone call setting e Push [V/M/C] to return to the frequency display. 1 r S et the receive frequency (repeater output frequency). 2 t S et the shift direction of the transmit frequency. (-DUP or 3 +DUP; see p. 26 for details.) y W hile continuing to push [PTT], push [MONI](BAND) to 4 transmit a 1750 Hz tone burst signal. 5 • If "OFF" appears, check the frequency offset or shift direction. (p. 26) 6 • The displayed frequency automatically changes to the transmit 7 frequency (repeater input frequency). u Push and hold [PTT] to transmit. 8 i Release [PTT] to receive. o P ush and hold [MONI](BAND) to check whether the other 9 station's transmit signal can be received directly or not, by 10 listening on the repeater input frequency. 11 ✔ CONVENIENT! (For the IC-T70E only) 12 q S et the receive frequency (repeater output frequency). 13 w S et the shift direction of the transmit frequency. (-DUP or +DUP; see p. 26 for details.) 14 e P ush [PTT] briefly, then push and hold [PTT] again for 1 to 2 sec. to transmit a 1750 Hz tone burst signal. 15 • If "OFF" appears, check the frequency offset or shift direction. 16 (p. 26) • The displayed frequency automatically changes to the transmit 17 frequency (repeater input frequency). 18 r Push and hold [PTT] to transmit; release to receive. 19 28