Icom IC-T70A HD Instruction Manual - Page 41
Programming memory/bank/scan name
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6 MEMORY/CALL CHANNELS ■ Programming memory/bank/scan name 1 Each memory channel can be programmed with an alphanumeric channel name for easy recognition as well as displayed independently by channel. Names can be a maximum of 6 characters. NOTE: Scan name display can be turned ON or OFF in the Initial set mode. (p. 63) q Push [V/M/C] to select the memory mode. w P ush and hold [S.MW](V/M/C) for 1 sec. to enter the select memory write mode. • 1 short and 1 long beep sounds. • The " " icon and memory channel number blink. e Rotate [DIAL] to select a desired memory channel. • Select Call channels (C0 or C1) to program a call channel, or scan edge channels (0A/0b to 24A/24b) to program a scan name. r P ush [SET] repeatedly to select "b nAmE," "m nAmE" or "S nAmE" when programming the bank name, the memory name or the scan name, respectively. t P ush and hold [SET] for 1 sec. to enter the name programming mode. • After selecting the name to be programmed, a cursor blinks for the first character. y R otate [DIAL] to select a desired character. • The selected character blinks. • Push [BAND] to move the cursor right; push [SET] to move the cursor left. u R epeat step y until a desired channel name is pro- 2 grammed. 3 i P ush and hold [S.MW](V/M/C) for 1 sec. to set the name and exit the channel name programming state. 4 • 3 beeps sound. 5 NOTE: Only one bank name can be programmed into each 6 bank. Therefore, the previously programmed bank name will be displayed when bank name is selected. Also, the 7 programmed bank name is assigned automatically to an- 8 other bank channel. 9 D Usable characters 10 11 (A) (b) (C) (d) (E) (F) (G) (H) ( I ) (J) (k) (L) (m) 12 13 (n) (O) (P) (q) (R) (S) (t) (U) (V) (W) (X) (y) (Z) 14 (0) (1) (2) (3) (4) (5) (6) (7) (8) (9) 15 16 Space) 17 18 19 34