Icom IC-T70A HD Instruction Manual - Page 74
Setting DTMF transfer speed
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
10 OTHER FUNCTIONS ■ Transmitting a DTMF code sequence (continued) D U sing a DTMF memory channel First, set the DTMF TX key to "mEm" in the Set mode. ➥ While continuing to push [PTT], push one of the keys to transmit the programmed DTMF code sequence in the DTMF memory. • Pushing [0] to [9], [A](SET), [B](BAND), [C](H/M/L), [D](V/M/C), [M](.) or [#] transmits "d0"-"d9," "dA," "db," "dC," "dd," "dE" or "dF." D 1 750 Hz tone To access some European repeaters, the transceiver must transmit a 1750 Hz tone burst signal. • This tone can be used as a 'Call signal' in countries out of Europe. First, set the DTMF TX key to "t-CALL" in the Set mode. ➥ While continuing to push [PTT], push and hold [MONI] (BAND) for 1 or 2 sec. to transmit a 1750 Hz tone burst signal. ■ Setting DTMF transfer speed The DTMF transfer speed can be selected. q While continuing to push [SET], turn the power ON to enter the Initial set mode. w R otate [DIAL] to select the DTMF transfer speed item, then rotate [VOL] to select the transfer speed. 100 : T ransfer the DTMF tones at about 100 msec. per tone. (default) 200 : T ransfer the DTMF tones at about 200 msec per tone. 300 : T ransfer the DTMF tones at about 300 msec per tone. 500 : T ransfer the DTMF tones at about 500 msec per tone. e P ush [ ] to return to the frequency display. 67