Icom IC-T70A HD Instruction Manual - Page 12
Dial], Tone Scan Key, T.scan], Tone/tone Squelch Key, Tone]0, Duplex Key
![]() |
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2 PANEL DESCRIPTION D Keypad (continued) OUTPUT POWER • SCAN KEY [H/M/L] • [SCAN](H/M/L) ➥ Push to select the output power. (p. 22) • Selects the transmit output power from high, middle or low. ➥ Push and hold for 1 sec. to enter the scan type selection mode. (pp. 42, 44, 45) • Push again to start the scan. BAND • MONITOR KEY [BAND] • [MONI](BAND) ➥ During VFO mode operation, push to select an operating frequency band. (p. 19) ➥ Push and hold to open the squelch temporarily and monitor the operating frequency. (p. 17) ➥ While continuing to push this key, rotate [DIAL] to adjust the squelch level. (p. 17) ➥ During memory mode operation, push to enter the memory bank group selection. (p. 33) SET • LOCK KEY [SET] • [ ](SET) ➥ Push to enter the Set mode. (p. 51) ➥ Push and hold for 1 sec. to toggle the lock function ON or OFF. (p. 21) ➥ During select memory write mode, push to select the items. (pp. 32, 34, 38, 39) TONE SCAN KEY [T.SCAN](#) ➥ Push and hold for 1 sec. to start the tone scan function. (p. 71) TONE/TONE SQUELCH KEY [TONE](0) ➥ Push and hold for 1 sec. to select sequentially repeater tone, tone squelch, tone squelch reverse, DTCS squelch, DTCS squelch reverse and no tone operation. (p. 70) • The pocket beep function is available with tone squelch and DTCS squelch. (p. 70) DUPLEX KEY [DUP](M) ➥ Push and hold for 1 sec. to select minus duplex, plus duplex or simplex operation. (p. 26) • "DUP-" (minus duplex), "DUP" (plus duplex) and no indication (simplex) appear in order.
![](/manual_guide/products/icom-ict70a-e-instruction-manual-08e11d5/12.png)