Icom IC-T70A HD Instruction Manual - Page 63
Memory bank link function B-LINK, Program scan link function P-LINK
![]() |
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SET MODES 9 D Memory bank link function (B-LINK) Turns the memory bank link function ON (default) or OFF. The link function provides continuous bank scan, scanning all channels in the selected banks during bank scan. • Bank link setting q Push and hold [SET] for 1 sec. to enter the bank link setting. w Rotate [DIAL] to select the bank that you want to change the link setting. e Rotate [VOL] to select the option. Setting is ON Setting is OFF r Rotate [DIAL] to select next bank and repeat steps w and e, or push [BAND] to exit the BANK link setting. D Program scan link function (P-LINK) 1 Sets the program scan link function. During program scan, link function performs a continuous program scan in the se- 2 lected program scan number during program scan. 3 Default settings for LInk0 to LInk9; PROG 1 to PROG 24 are linked, but PROG 0 is not linked. 4 5 6 7 • Confirming program scan link 8 q Rotate [VOL] to select the program scan link number that you want to confirm. 9 10 11 w Push and hold [SET] for 1 sec. to enter the program scan 12 link setting. • "LInk" appears. 13 14 15 e Push and hold [SET] for 1 sec., then rotate [DIAL] to 16 confirm the linked program scans. 17 18 19 r Push [BAND] twice to exit the program scan link setting. 56
![](/manual_guide/products/icom-ict70a-e-instruction-manual-08e11d5/63.png)