Icom IC-T70A HD Instruction Manual - Page 43
Display type
![]() |
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
6 MEMORY/CALL CHANNELS ■ Display type During memory mode operation, the transceiver has 3 display types to suit your operating style. Set the display type in the Initial set mode. q W hile continuing to push [SET], turn the power ON to enter the Initial set mode. w R otate [DIAL] to select the display mode item, then rotate [VOL] to set the display type from "FREq," "CH" or "PRIV." [DIAL] [VOL] Display mode setting e P ush [ ] to return to the frequency display. "Frequency display" Displays the programmed frequency. (default) 1 "Channel number display" 2 Displays the memory channel 3 number. Only programmed mem- ory channels are displayed, and 4 modes other than the memory mode cannot be selected. 5 • When the channel number display type is selected, only the 6 following functions can be performed. 7 - Scan function (p. 44) - Output power setting (p. 22) - Monitor function (p. 17) - Key lock function (p. 21) 8 - DTMF transmit function (p. 66) 9 - The scan pause timer setting, the scan resume timer setting, the DTMF memory selection, the mic gain setting and the VOX gain 10 setting in the Set mode. 11 "Private channel display" 12 Displays the memory channel number. Only programmed mem- 13 ory channels 0 to 5 are displayed, 14 and modes other than the memory mode cannot be selected. 15 • When the private channel display type is selected, only the 16 following functions can be performed. 17 - Output power setting (p. 22) - Monitor function (p. 17) - Key lock function (p. 21) - DTMF transmit function (p. 66) 18 19 36
![](/manual_guide/products/icom-ict70a-e-instruction-manual-08e11d5/43.png)