Icom IC-T70A HD Instruction Manual - Page 62
Priority watch PRIO, Scan pause timer PAUSE, Scan resume timer RESUME, Program skip scan P SKIP
![]() |
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
9 SET MODES D Priority watch (PRIO) Activates priority watch or priority watch with priority beep. (default: OFF) • OFF : The priority watch is turned OFF. • On : The transceiver checks the memory channel frequency every 5 seconds. • bELL : The transceiver checks the memory channel frequency every 5 seconds. You can be alerted with beeps and a blinking "S" icon. D Scan resume timer (RESUME) Selects the scan resume time of a pause after the received signal disappears. (default: 2) • 0 : Scan resumes immediately after the received signal disappears. • 1-5 : Scan pauses 1-5 seconds after the received signal dis- appears. • HOLd : Scan remains paused on the received signal according to the scan pause timer, even if it disappears. Rotate [DIAL] to manually resume the scan. D Scan pause timer (PAUSE) Selects the scan pause time. When receiving signals, the scan pauses according to the scan pause timer. (default: 10) • 2-20 : Scan pauses for 2-20 seconds while receiving a signal in 2 seconds steps. • HOLd : Scan pauses on a received signal until it disappears. The scan resume timer must be set shorter than the scan pause timer (previous item), otherwise this timer will not be activated. D Program skip scan (P SKIP) Turns the programmed skip scan function ON or OFF for a VFO scan operation (full scan, programmed scan, etc.). (default: On) 55
![](/manual_guide/products/icom-ict70a-e-instruction-manual-08e11d5/62.png)