Icom IC-T70A HD Instruction Manual - Page 64
Dial], Band], V/m/c]
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
9 SET MODES • Program scan link setting q Rotate [VOL] to select the program scan link number that you want to change. • Program scan link name programming q Rotate [VOL] to select the program scan link number for which you want to program a name. w Push and hold [SET] for 1 sec. to enter the program scan link setting. • "LInk" appears. e Rotate [DIAL] to select the option, "Add" or "CLEAR." r Push and hold [SET] for 1 sec., then rotate [DIAL] to select the desired program scan. • When "Add" is selected in step e, only non-linked program scans are displayed. When "CLEAR" is selected in step e, only linked program scans are displayed. w Push and hold [SET] for 1 sec. to enter the program scan link setting. • "LInk" appears. e Rotate [DIAL] to select "nAmE." r Push and hold [SET] for 1 sec. to enter the name programming. t R otate [DIAL] to select the desired character, number, symbol or space; push [BAND] or [SET] to move the cursor right or left, respectively. y W hen the cursor is on the 6th digit, push [BAND] to program the scan link name and exit the setting. t Push and hold [SET] for 1 sec. to set the program scan link setting. y Repeat steps r and t to add or clear the program scan to or from the link, or push [BAND] to exit the program link scan setting. 57 u Push [BAND] to exit the program link setting. i Repeat steps from q to u to program the program link scan name, or push [V/M/C] to exit the Set mode.