Icom IC-T70A HD Instruction Manual - Page 69
LCD contrast CONT, PTT lock PTT LK, Busy lockout LK OUT, Time-out timer TOT, Squelch delay SQL DL
![]() |
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
SET MODES 9 D LCD contrast (CONT) Selects the LCD contrast. (default: Auto) • Auto : Sets the contrast to high. However, if the transceiver is exposed to high temperatures, it automatically sets the contrast to low. • HI : Sets the contrast to high. • LO : Sets the contrast to low. D �P�T�T��lo��c�k�(�P�T�T��L�K��) Turns the PTT lock function ON or OFF. To prevent accidental transmission, the transceiver has the PTT lock function. (default: OFF) D Busy lockout (LK OUT) Turns the busy lockout function ON or OFF. This function inhibits transmission while receiving a signal or when the squelch is open. (default: OFF) D Time-out timer (TOT) 1 To prevent accidental prolonged transmission, the transceiver has a time-out timer. This function cuts transmission OFF 2 after 1-30 min. of continuous transmission. This timer can be 3 cancelled. (default: 5) • OFF : The time-out timer is turned OFF. 4 • 1 to 30 : The transmission is cut OFF after the set period elapses. 5 6 7 Approx. 10 seconds before the time-out timer is activated, 8 the transceiver emits a beep tone as a warning. 9 B E CAREFUL! The transceiver will become hot when this 10 time-out timer function is turned OFF or set to a long time period, and transmission is made for long periods. 11 12 D Squelch delay (SQL DL) 13 Sets the squelch delay between short and long. The delay prevents the squelch from repeatedly opening and closing 14 while receiving the same signal. (default: SHORt) 15 • SHORt : Sets the squelch delay to short. 16 • LOnG : Sets the squelch delay to long. 17 18 19 62
![](/manual_guide/products/icom-ict70a-e-instruction-manual-08e11d5/69.png)