Icom IC-T70A HD Instruction Manual - Page 54
Scan resume setting
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
7 SCAN OPERATION ■ Scan resume setting D Scan pause timer The scan pauses while receiving signals, depending on the scan pause time. It can be set from 2 to 20 seconds or unlimited. q P ush [SET] to enter the Set mode. w R otate [DIAL] to select the scan pause timer item. e R otate [VOL] to select a desired scan pause time from 2-20 seconds (2 seconds steps) or "HOLd." • "2"-"20" : Scan pauses for 2-20 seconds while receiving a sig- nal. • "HOLd" : Scan pauses on a received a signal until it disap- pears. r Push [V/M/C] to return to the frequency display. D Scan resume timer The scan restarts after the signal disappears, depending on the resume time. It can be set from 0-5 seconds or unlimited. q P ush [SET] to enter the Set mode. w R otate [DIAL] to select the scan resume timer item. e R otate [VOL] to select a desired scan resume time from 0-5 seconds (1 second steps) or "HOLd." • "0" : Scan restarts immediately after the signal disap- pears. • "1"-"5" : Scan restarts 1-5 seconds after the signal disap- pears. • "HOLd" : Scan remains paused on the received signal accord- ing to the scan pause timer even if it disappears. Ro- tate [DIAL] to manually resume the scan. r Push [V/M/C] to return to the frequency display. The scan resume timer must be set shorter than the scan pause timer, otherwise this timer will not be activated. 47