Icom IC-T70A HD Instruction Manual - Page 49

Full/band/programmed scan

Get Icom IC-T70A HD PDF manuals and user guides View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

SCAN OPERATION 7 ■ Full/band/programmed scan q Push [V/M/C] to select the VFO mode. • Push [BAND] to select a desired frequency band. w Set the squelch level. e P ush and hold [SCAN](H/M/L) for 1 sec. to enter the scan type selection mode. r R otate [DIAL] to select a desired scanning type. • Select "ALL" for full scan, "bAnd" for band scan, "P-LInk x" for programmed link scan (x= 0 to 9), "PROGxx" for programmed scan (xx= 0 to 24; only programmed scan edge numbers are displayed), "dUP" (appears only when duplex operation is set) for a duplex scan. [DIAL] Full scan Push and hold for 1 sec. Rotate Programmed scan Band scan Selectable from "0" to "24," if programmed. (p. 43) Duplex scan Programmed link scan Selectable from "0" to "9." See page 57 for details of the programming. 1 t Push [SCAN](H/M/L) to start the scan. 2 • The scan pauses when a signal is received. 3 • Rotate [DIAL] to change the scanning direction. This also re- sumes scanning. 4 • Push [V/M/C] to stop the scan. • Push [BAND] to change the band during band scan, or change 5 the scan edge during programmed scan/program link scan. 6 • While continuing to push [SCAN](H/M/L) in step e, rotate [DIAL] to select a desired scanning type, then release the key 7 also starts the scan. 8 9 10 During full/band scan During programmed scan 11 12 The scan link name or scan name can be displayed instead of "P-LInk x" for program link scan (x= 0 to 9), "PROGxx" for 13 programmed scan (xx= 0 to 24) when scan link name or scan 14 name is programmed and set to ON in the Initial set mode. Scan link name or scan name is not displayed during scan. 15 16 17 18 19 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
■
Full/band/programmed scan
q
Push
[V/M/C]
to select the VFO mode
.
• Push
[BAND]
to select a desired frequency band.
w
Set the squelch level.
e
Push and hold
[SCAN]
(H/M/L) for 1 sec. to enter the scan
type selection mode.
r
Rotate
[DIAL]
to select a desired scanning type.
• Select “ALL” for full scan, “bAnd” for band scan, “P-LInk x” for
programmed link scan (x= 0 to 9), “PROG
xx
” for programmed
scan (
xx
= 0 to 24; only programmed scan edge numbers are
displayed), “dUP” (appears only when duplex operation is set)
for a duplex scan.
[DIAL]
Full scan
Band scan
Duplex scan
Programmed link scan
Push and hold
for 1 sec.
Programmed scan
Rotate
Selectable from “0” to “9.”
See page 57 for details
of the programming.
Selectable from “0” to “24,”
if programmed. (p. 43)
t
Push
[SCAN]
(H/M/L) to start the scan.
• The scan pauses when a signal is received.
• Rotate
[DIAL]
to change the scanning direction. This also re-
sumes scanning.
• Push
[V/M/C]
to stop the scan.
• Push
[BAND]
to change the band during band scan, or change
the scan edge during programmed scan/program link scan.
• While continuing to push
[SCAN]
(H/M/L) in step
e
, rotate
[DIAL]
to select a desired scanning type, then release the key
also starts the scan.
During full/band scan
During programmed scan
The scan link name or scan name can be displayed instead
of “P-LInk x” for program link scan (x= 0 to 9), “PROGxx” for
programmed scan (xx= 0 to 24) when scan link name or scan
name is programmed and set to ON in the Initial set mode.
Scan link name or scan name is not displayed during scan.
42
7
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19