Icom IC-T70A HD Instruction Manual - Page 20
Desktop battery chargers
View all Icom IC-T70A HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 BATTERY CHARGING ■ Desktop battery chargers D Charging note • Be sure to turn the transceiver power OFF. • N EVER place the transceiver with the battery pack to the desktop charger when the transceiver is connected to the DC power supply. This may cause the charger's malfunction and the charging indicator of the charger lights red*. In that case, disconnect the AC adapter from the charger, and then reconnect the AC adapter to the charger. *Red indicator is only available for the BC-191 or BC-193. • The optional CP-23L* and OPC-515L can be used instead of the supplied AC adapter. Connect one of these to the [DC 12-16V] jack. * CP-23L can only be used with the BC-191 or BC-193. IMPORTANT: Tabs Ensure the tabs on the battery pack are correctly aligned with the guide rails inside the charger. Guide rail CAUTION: When using the OPC-515L DC power cable NEVER connect the OPC-515L to a power source using reverse polarity. This will ruin the battery charger. White line: + Black line: - 13 D Rapid charging with the BC-191 The BC-191 provides rapid charging of only the BP-264 Ni-MH battery pack. Never use it to charge any other battery pack. Charging time (with the BC-123S): Approx. 2 hours The following item is additionally required: • The AC adapter BC-123S (not supplied with some versions) or the OPC-515L or CP-23L DC power cable. BC-123S Battery pack Transceiver The optional OPC515L (for a DC power source) or CP-23L (for a 12 V cigarette lighter socket) can be used instead of the AC adapter. Turn power OFF Screws* (Self tapping screw: M3.5 × at least 30 mm) *Purchase separately. Using screws is recommended to secure the charger. Charge indicator • Lights orange : While charging • Lights green : Charging is completed • Blinks red : Charging error has occured