Intel 2011B Configuration Guide - Page 21
Setting the Ethernet Timeout to 1
UPC - 735858150187
View all Intel 2011B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Channel Setting. For wireless AP operations, it is not necessary to make any changes to the Channel setting. Designated WLAPs normally adopt the channel number of the root access point instead of using their own channel numbers specified on the System Configuration screen. To view the adopted channel number, refer to the System Summary screen. Access Point A System Configuration Channel Auto Channel Select .Ethernet Timeout 3 Disabled 1 .Telnet Logins Enabled .Access Control .Type Filtering Disabled Disabled WNMP Functions Enabled .AP-AP State Xchg Enabled .Encryption Admin Any .Agent Ad Interval 0 .S24 Mobile IP Disabled .Mobile-Home MD5 key ******* .Web Server Enabled Configure Kerberos-[F3] Ethernet Interface RF Interface Default Interface On On Ethernet .MU-MU Disallowed Off .Modem Connected No .Inactivity Timeout 5 System Password Admin-[F4] OK-[CR] Save-[F1] Save All APs-[F2] Cancel-[ESC] Sftwr detect(30-255 secs), 2,3,4 WLAP detect, 1 hardware detect, 0 disable Figure 4-6: Setting the Ethernet Timeout to 1 Configuring Access Point Bridging and Repeating (WLAP Mode) 15