Intel 2011B Configuration Guide - Page 33
Running the RF Link Test with Telnet
UPC - 735858150187
View all Intel 2011B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 6. RF Link Test Local Access Point Connection Quality Test Remote Device MAC Address: 00:A0:F8:94:C2:04 max | | | | Signal | Quality | | | | min | Tx Rate 11 Mb/s Rx Rate 11 Mb/s Tx Retries 0 RSSI 31 Exit-[ESC] Figure 6-6: Test Screen Showing Maximum Quality of 31 Some settings on the RF Configuration screen may also affect the RF Link Test. These settings are described in 6.6.2: Procedure for Aligning Directional Antennas. Local Access Point MAC Addr: 00:A0:F8:93:C5:B5 Remote Access Point MAC Addr: 00:A0:F8:94:C2:04 Wireless AP Link Portable Computer Running the RF Link Test Figure 6-7: Basic Setup for RF Link Test LAPTOPLITE2.CDR, AP11MB3DSHADED.CDR 6.4.1 Running the RF Link Test with Telnet For access point networks that are already installed, it may be more appropriate to run the RF Link Test using a Telnet connection. In this case, you must connect the local access point and computer running the RF Link Test to the same Ethernet network. Configuring Access Point Bridging and Repeating (WLAP Mode) 27