Intel S2600IP Service Guide - Page 121

BIOS Setup Utilities Option Values: Enabled Disabled Help Text: Enable/Disable Onboard/IOM NIC discs Option ROM Load. Comments: This selection is to enable/disable the discs Option ROM that is used by all Onboard and IO Module 1 GbE and 10 GbE controllers. This option is grayed out and not accessible if the 1 GbE or 10GbE PXE Option ROM is enabled or if the 10 GbE FCoE Option ROM is enabled. It can co-exist with an InfiniBand controller Option ROM. If the discs Option ROM is disabled, and no other Option ROM is enabled, the system cannot perform a Network Boot and cannot respond for Wake-on-LAN. This discs option does not appear unless there is an discs-capable NIC installed in the system as an Onboard or IO Module NIC. 6. Onboard NIC1 Type 7. Onboard NIC2 Type Option Values: One of these strings: Intel® 82574 Single-Port Gigabit Ethernet Controller Intel® I350 Dual-Port Gigabit Ethernet Controller Intel® I350 Quad-Port Gigabit Ethernet Controller Intel® I540 Dual-Port X540 10 Gigabit RJ-45 Controller Mellanox* ConnectX-3* Single-Port InfiniBand FD14 Controller Help Text: Comments: Information only. This is a display showing which NICs are available as Network Controllers integrated into the baseboard. Each of these Onboard NICs will be followed by a section including a group of options that are specific to the type of NIC, either as an Ethernet controller or an InfiniBand controller. If a board only has one onboard NIC, the second NIC Type and following options section will not appear. If there is an InfiniBand controller integrated onboard, it will appear as NIC2. For details about the NIC hardware configuration for a specific board, see the Technical Product Specification for that board. 8. IO Module 1 Type 9. IO Module 2 Type Intel® Server System R2000IP Service Guide 109