Intel S2600IP Service Guide - Page 162

BIOS Setup Utilities Option Values: [Entry Field, 2-63 characters] Help Text: View/Edit BMC DHCP host name. Press to edit. Host name should start with an alphabetic, remaining can be alphanumeric characters. Host name length may be from 2 to 63 characters. Comments: This field is active and may be edited whenever at least one of the IP Source or IPv6 Source options is set to Dynamic. This is the name of the DHCP Host from which dynamically assigned IPv4 or IPv6 addressing parameters are acquired. The initial value for this field is supplied from the BMC, if there is a DHCP Host available. The user can edit the existing Ho or enter a different DHCP Host Name. If none of the IP/IPv6 Source fields is set to Dynamic, then this BMC DHCP Host Name field will be grayed out and inactive. 20. User ID Option Values: anonymous root User3 User4 User5 Help Text: Select the User ID to configure: User1 (anonymous), User2 (root), and User3/4/5 are supported. Comments: These 5 User IDs are fixed choices and cannot be changed. The BMC supports 15 User IDs natively, but only the first 5 are supported through this interface. 21. Privilege Option Values: Callback User Operator Administrator Help Text: View/Select user privilege. User2 (root) privilege is "Administrator" and cannot be changed. Comments: The level of privilege that is assigned for a User ID affects which functions that user may perform. 22. User Status 150 Intel® Server System R2000IP Service Guide