Intel S2600IP Service Guide - Page 38
Installing the System Cover
View all Intel S2600IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Hardware Installations and Upgrades Note: A non-skid surface or a stop behind the server system may be needed to prevent the server system from sliding on your work surface. 1. Observe the safety and ESD precautions at the beginning of this book. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the power cord. 4. Remove the four screws (see letter A). 5. Slide cover back and lift upward (see letter B). Figure 33. Removing the System Cover Installing the System Cover 1. Place system cover onto the chassis and slide forward to engage recessed edge at front of cover (see letter A). 2. Tighten the four screws (see letter B). Figure 34. Installing the System Cover 26 Intel® Server System R2000IP Service Guide