Intel S2600IP Service Guide - Page 147

BIOS Setup Utilities Option Values: Help Text: View/Configure BMC LAN and user settings. Comments: Selection only. Position to this line and press the key to go to the BMC LAN Configuration group of configuration settings. Console Redirection The Console Redirection screen allows the user to enable or disable Console Redirection for Remote System Management, and to configure the connection options for this feature. To access this screen from the Main screen, select Server Management > Console Redirection. To move to another screen, press the key to return to the Server Management screen, then select the desired screen. When Console Redirection is active, all POST and Setup displays are in Text Mode. The Quiet Boot setting is disregarded, and the Text Mode POST Diagnostic Screen will be displayed regardless of the Quiet Boot setting. This is due to the limitations of Console Redirection, which is based on data terminal emulation using a serial data interface to transfer character data. Console Redirection can use either of the two Serial Ports provided by the SuperIO in the BMC. However, if Console Redirection is to be coordinated with Serial Over LAN, the user should be aware that SOL is only supported through Serial Port A (except for W200CR, which only has Serial B and supports SOL on Serial B). Console Redirection Server Management Console Redirection Flow Control Baud Rate Terminal Type Legacy OS Redirection Terminal Resolution Disabled / Serial Port A / Serial Port B None / RTS/CTS 9.6k / 19.2k / 38.4k / 57.6k / 115.2k PC-ANSI / VT100 / VT100+ / VT-UTF8 Enabled / Disabled 80x24 / 100x31 Figure 109. Console Redirection Screen Screen Field Descriptions: 1. Console Redirection Intel® Server System R2000IP Service Guide 135