Intel S2600IP Service Guide - Page 50
Installing a Slimline Optical Drive, Removing a Slimline Optical Drive
View all Intel S2600IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Hardware Installations and Upgrades turn off the system by pressing the power button, and unplug the power cord from the system or wall outlet. To maintain proper system cooling, a filler panel must be installed if you do not install a device at this location. Installing a Slimline Optical Drive 1. Install the plastic guide onto the back of the drive and attach with two screws as shown (see letter A). Figure 58. Installing the Plastic Guide to the Optical Drive 2. Insert the optical drive into chassis opening and push all the way until it stops (see letter B). Connect the cables as shown (see letter C). Figure 59. Installing an Optical Drive Removing a Slimline Optical Drive 1. Remove the cables (see letter A). 2. Lift up the blue tab to release the optical drive (see letter B). 3. Slide the optical drive out (see letter C). 38 Intel® Server System R2000IP Service Guide