Intel S2600IP Service Guide - Page 138

BIOS Setup Utilities Comments: The User password is available only if the Administrator Password has been installed. This option protects Setup settings as well as boot choices. The User Password only allows limited access to the Setup options, and no choice of boot devices. When Power On Password protection is enabled, the User password may be used to allow the BIOS to complete POST and boot the system. The password format and entry rules and popup error and warning message are the same for the User password as for the Administrator password (see above). 5. Power On Password Option Values: Enabled Disabled Help Text: Enable Power On Password support. If enabled, password entry is required in order to boot the system. Comments: When Power On Password security is enabled, the system will halt soon after power on and the BIOS will ask for a password before continuing POST and booting. Either the Administrator or User password may be used. If an Administrator password has not been set, this option will be grayed out and unavailable. If this option is enabled and the Administrator password is removed, that will also disable this option. 6. Front Panel Lockout Option Values: Enabled Disabled Help Text: If enabled, locks the power button OFF function and the reset and NMI Diagnostic Interrupt buttons on the system's front panel. If [Enabled] is selected, power off and reset must be controlled by a system management interface, and the NMI Diagnostic Interrupt is not available. Comments: Note: This option does not appear on all boards. 7. TPM State 126 Intel® Server System R2000IP Service Guide