Intel S2600IP Service Guide - Page 63
Replacing the 2.5'' Hard Drive Backplane
View all Intel S2600IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Hardware Installations and Upgrades Figure 79. Installing 3.5'' hard drive backplane - install the hard drive cage 6. Intall the clip to server chassis (see letter F). 7. With the lever open, insert the hard disk drive assembly into the chassis (see letter G). Push in the lever to lock it into place (see letter H). Repeat step G and H to make sure all hard drive assemblies are in place. Figure 80. Installing 3.5'' hard drive backplane - install the stiffener and hard drives 8. Connect cables to the backplane. Replacing the 2.5'' Hard Drive Backplane Removing the 2.5'' Hard Drive Backplane: 1. Remove all hot-swap drive carriers, regardless of whether or not a drive is installed in the carrier. Disconnect all cables from the backplane. 2. Remove the six screws to release the stiffener (see letter A). 3. Slide the stiffener cage out of the server chassis (see letter B). Intel® Server System R2000IP Service Guide 51