Intel SBXL52 Hardware Maintenance Manual - Page 38
Error symptoms, Small computer system interface messages, Light path diagnostics* feature overview
View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Error symptoms This section describes methods for troubleshooting other error symptoms. Error symptom charts You can use the error symptom charts to find solutions to problems that have definite symptoms (see "Error symptoms" on page 83). If you cannot find the problem in the error symptom charts, go to "Starting the diagnostic programs" on page 22 to test the blade server. Small computer system interface messages This information only applies if a storage expansion unit is available. If your receive a SCSI error message when running the SCSI Select Utility program, see "SCSI error codes" on page 95. ✏ NOTE If your server does not have a hard disk drive, ignore any message that indicates that the BIOS is not installed. Light path diagnostics* feature overview If the system-error LED on the system LED panel on the front or rear of the SBCE unit is lit, one or more error LEDs on the SBCE unit components also might be on. These LEDs help identify the cause of the problem. Identifying problems using the light path diagnostics This section provides the information to identify, using the light path diagnostics, problems that might arise during installation. To locate the actual component that caused the error, you must locate the lit error LED on that component. For example: 24 SBXL52: Hardware Maintenance Manual and Troubleshooting Guide