Intel SBXL52 Hardware Maintenance Manual - Page 86

Run the Configuration/Setup Utility program., Configuration/Setup Utility is

Get Intel SBXL52 - Server Compute Blade PDF manuals and user guides View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

✏ NOTE See "System" on page 104 to determine which components should be replaced by a field service technician. Beep/symptom FRU/action 3-3-2 (Critical SMBUS error occurred) 1. Power down blade server and reseat it in chassis. 2. DIMMs. 3. System board. 3-3-3 1. Install or reseat the memory modules, and then do a 3 boot reset. (No operational memory in system) (For more information on a 3 boot reset, see "Using the Configuration/Setup Utility program" on page 11) ✏ NOTE In some memory configurations, the 3-3-3 2. DIMMs. 3. System board. beep code might sound during POST followed by a blank display screen. If this occurs and the Boot Fail Count feature in the Start Options of the Configuration/Setup Utility is set to Enabled (its default setting), you must restart the server three times to force the system BIOS code to reset the memory connector or bank of connectors from Disabled to Enabled. Two short beeps 1. Run Diagnostics. (Information only, the configuration 2. Run the Configuration/Setup Utility program. has changed) Three short beeps 1. DIMM 2. System board One continuous beep 1. Microprocessor 2. Optional microprocessor (if installed) 3. System board Repeating short beeps 1. Keyboard 2. System board 72 SBXL52: Hardware Maintenance Manual and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
72
SBXL52: Hardware Maintenance Manual and Troubleshooting Guide
3-3-2
(Critical SMBUS error occurred)
1.
Power down blade server and reseat it in chassis.
2.
DIMMs.
3.
System board.
3-3-3
(No operational memory in system)
NOTE
In some memory
configurations, the 3-3-3
beep code might sound
during POST followed by a
blank display screen. If this
occurs and the
Boot Fail
Count
feature in the
Start
Options
of the
Configuration/Setup Utility is
set to
Enabled
(its default
setting), you must restart the
server three times to force
the system BIOS code to
reset the memory connector
or bank of connectors from
Disabled
to
Enabled
.
1.
Install or reseat the memory modules, and then do a 3 boot reset.
(For more information on a 3 boot reset, see “Using the
Configuration/Setup Utility program” on page 11)
2.
DIMMs.
3.
System board.
Two short beeps
(Information only, the configuration
has changed)
1.
Run Diagnostics.
2.
Run the Configuration/Setup Utility program.
Three short beeps
1.
DIMM
2.
System board
One continuous beep
1.
Microprocessor
2.
Optional microprocessor
(if installed)
3.
System board
Repeating short beeps
1.
Keyboard
2.
System board
NOTE
See “System” on page 104 to determine which components should be replaced by a field service
technician.
Beep/symptom
FRU/action