Intel SBXL52 Hardware Maintenance Manual - Page 6
Regulatory specifications and disclaimers, Safety compliance
View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
• Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. • Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. DANGER Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following: Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. xxCAUTION: Hazardous energy is present when the blade is connected to the power source. Always replace the blade cover before installing the blade. Regulatory specifications and disclaimers Safety compliance USA: Canada: Europe: International: Australia/New Zealand: UL 60950 - 3rd Edition/CSA 22.2. No. 60950 cUL certified - 3rd Edition/CSA 22.2. No. 60950- for Canada (product bears the single cUL mark for U.S. and Canada) Low Voltage Directive, 73/23/EEC UL/CB to EN60950 3rd Edition UL/CB to IEC 60950 3rd Edition UL/CB - EN60 950 3rd Edition UL/CB - EMKO-TSE (74-SEC) 207/94 CB Report to IEC 60950, 3rd Edition plus international deviations vi SBXL52: Hardware Maintenance Manual and Troubleshooting Guide