Intel SBXL52 Hardware Maintenance Manual - Page 85
Serial port failed, Time-Of-Day clock failed
View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
✏ NOTE See "System" on page 104 to determine which components should be replaced by a field service technician. Beep/symptom FRU/action 2-2-3 (CMOS power failure and checksum checks failed) 1. Battery 2. System board 2-2-4 (CMOS configuration information validation failed) 1. Battery 2. System board 2-3-1 (Screen initialization failed) • System board 2-3-2 (Screen memory failed) • System board 2-3-3 (Screen retrace failed) • System board 2-3-4 (Search for video ROM failed) • System board 2-4-1 (Video failed; screen believed operable) • System board 3-1-1 (Timer tick interrupt failed) • System board 3-1-2 (Interval timer channel 2 failed) • System board 3-1-3 (RAM test failed above address OFFFFH)) 1. DIMM 2. System board 3-1-4 (Time-Of-Day clock failed) 1. Battery 2. System board 3-2-1 (Serial port failed) • System board 3-2-2 (Parallel port failed) • System board 3-2-3 (Math coprocessor test failed) 1. Microprocessor 2. System board 3-2-4 (Failure comparing CMOS memory size against actual) 1. DIMM 2. System board 3. Battery 3-3-1 (Memory size mismatch occurred.) 1. Verify that both DIMMs in bank are of the same size, speed, type and technology. 2. DIMM 3. System board 4. Battery Symptom-to-FRU index 71