Intel SBXL52 Hardware Maintenance Manual - Page 93
Run diagnostics., Fixed disk error
View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
✏ NOTE See "System" on page 104 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 1301 (I2C cable to operator information panel not found) 1. Cable 2. Operator information card 3. Power switch assembly 4. System board 1302 (I2C cable from system board to poweron and reset switches not found) 1. Cable 2. Power switch assembly 3. System board 1303 (I2C cable from system board to power backplane not found) 1. Cable 2. Power supply 3. System board 1304 (I2C cable to diagnostic LED board not found) 1. Power switch assembly 2. System board 1762 (Hard disk configuration error) 1. Hard disk drive. 2. Hard disk drive cables. 3. Run the Configuration/Setup Utility program. 4. SCSI storage expansion unit. 5. System board. 178X (Fixed disk error) 1. Hard disk drive cables. 2. Run diagnostics. 3. Hard disk drive. 4. System board. 1800 (No more hardware interrupt available for PCI adapter) 1. Run Configuration/Setup to verify that the interrupt resource settings are correct. 2. Failing adapter (if installed). 3. System board. 1962 (Drive does not contain a valid boot sector) 1. Verify that a startable operating system is installed. 2. Run diagnostics. 3. Hard disk drive. 4. SCSI storage expansion unit. 5. System board. 2400 (Video controller test failure) 1. Verify that the keyboard/mouse/video select button LED on the front of the blade server is on, indicating that the blade server is connected to the shared SBCE monitor. 2. Verify that the monitor is connected correctly to the SBCE unit. 3. Video adapter (if installed). 4. System board. Symptom-to-FRU index 79