Intel SBXL52 Hardware Maintenance Manual - Page 58

Locate the SCSI connector on the system board and remove the terminator from the connector.

Get Intel SBXL52 - Server Compute Blade PDF manuals and user guides View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Complete the following steps to install the SCSI storage expansion unit: 1. Review "Electrical Safety" on page vi and "Installation guidelines" on page 27. 2. Shut down the operating system, turn off the blade server, and remove the blade server from the SBCE unit (see "Removing the blade server from the SBCE unit" on page 33 for instructions). 3. Carefully lay the blade server on a flat, non-conductive surface. 4. Remove the blade server cover. a. Open the blade server cover (see "Opening the blade server cover" on page 33 for instructions) and lift it off the blade server. b. Store the cover in a safe place. 5. Locate the SCSI connector on the system board and remove the terminator from the connector. 6. Install the SCSI storage expansion unit: a. Orient the storage expansion unit as shown in the illustration. b. Lower the storage expansion unit so that the slots at the rear slide down onto the pins at the rear of the blade server. 44 SBXL52: Hardware Maintenance Manual and Troubleshooting Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
44
SBXL52: Hardware Maintenance Manual and Troubleshooting Guide
Complete the following steps to install the SCSI storage expansion unit:
1.
Review “Electrical Safety” on page vi and “Installation guidelines” on page 27.
2.
Shut down the operating system, turn off the blade server, and remove the blade server from the
SBCE unit (see “Removing the blade server from the SBCE unit” on page 33 for instructions).
3.
Carefully lay the blade server on a flat, non-conductive surface.
4.
Remove the blade server cover.
a.
Open the blade server cover (see “Opening the blade server cover” on page 33 for
instructions) and lift it off the blade server.
b.
Store the cover in a safe place.
5.
Locate the SCSI connector on the system board and remove the terminator from the connector.
6.
Install the SCSI storage expansion unit:
a.
Orient the storage expansion unit as shown in the illustration.
b.
Lower the storage expansion unit so that the slots at the rear slide down onto the pins at the
rear of the blade server.