Intel SBXL52 Hardware Maintenance Manual - Page 45
Switches and jumpers, Switches
View all Intel SBXL52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Switches and jumpers The following illustration shows the location of the switches and jumpers on the system board. Switches Table 1 describes the function of each switch on switch block (SW2). Switch number Switch Default value description 1 through 4 Off Reserved. 5 Off Power-on override. When toggled to On, this switch forces the blade server to turn on, overriding the power-on button. The power-on override switch should be used for debug purposes only and should not be used to override management module control of the server. 6 through 7 Off Reserved 8 Off Power-on password override. Changing the position of this switch bypasses the power-on password check the next time the blade server is turned on and starts the Configuration/Setup Utility program so that you can change or delete the power-on password. You do not need to move the switch back to the default position after the password is overridden. See "Using passwords" on page 14 for additional information about the power-on password. Table 1. Switch block (SW2) Installing options 31