Intel SR1670HV Service Guide - Page 106
Create RAID Volume Menu, Select Disks Screen
![]() |
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Embedded SATA RAID Figure 136. Create RAID Volume Menu 2. Enter a name for the RAID set and press . 3. When the RAID Level option is selected, press the up/down arrow key to select a RAID level to create, and then press . 4. When the Disks option is selected, press to select the hard disk drives you want to include in the RAID set. The SELECT DISKS screen appears. Figure 137. Select Disks Screen 5. Use the up/down arrow keys and key to select each drive to include in the RAID set. 6. Press after completing your selections. 7. Use the up/down arrow key to select the stripe size for the RAID set (for RAID 0, 10 and 5 only), and then press . The available stripe size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB When the Capacity option is selected, enter the RAID volume capacity you want and press . The default value indicates the maximum allowed capacity. When the Create Volume option is selected, press . The following warning message displays: Intel® Server System SR1670HV Service Guide 91
![](/manual_guide/products/intel-sr1670hv-service-guide-3ca2ac9/106.png)