Intel SR1670HV Service Guide - Page 50
Jumpers, Connectors, and LEDs
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Jumpers, Connectors, and LEDs 5. Jumpers, Connectors, and LEDs 5.1 Configuration and Support Jumpers 5.1.1 Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which includes system setup information such as system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5 to 10 seconds, and then move the cap back to pins 1-2. 3. Plug in the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter the BIOS setup to re-enter data. CAUTION Except when clearing the RTC RAM, never remove the cap on the CLRTC jumper default position. Removing the cap causes system boot failure! NOTE: If the steps above do not help, remove the onboard battery and move the jumper again to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery. Figure 59. Clear RTC RAM Intel® Server System SR1670HV Service Guide 35