Intel SR1670HV Service Guide - Page 109
Installing the RAID Controller Driver
![]() |
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Driver Installation 7. Locate the RAID driver and place a blank, high-density floppy disk into the floppy disk drive. 8. Press . 9. Follow screen instructions to create the driver disk. 8.1.1.2 Creating a RAID driver disk from a Microsoft Windows* environment: 1. Start Microsoft Windows*. 2. Place the Resource CD into the optical drive. 3. Go to the Make Disk menu, and then select the type of RAID driver disk you want to create. 4. Insert a floppy disk into the floppy disk drive. 5. Follow the succeeding screen instructions to complete the process. NOTE: Write-protect the floppy disk to avoid a computer virus infection. 8.1.1.3 Creating a RAID driver disk from a Red Hat* Enterprise Linux server environment: 1. Insert a blank formatted high-density floppy disk to the floppy disk drive. 2. Decompress the file into the floppy disk from the following path in the support DVD: Example: For the LSI* Logic Embedded SATA RAID Driver: \Drivers\ICH10R LSI RAID\Driver\makedisk\Linux 3. Eject the floppy disk. 8.1.2 Installing the RAID Controller Driver 8.1.2.1 Microsoft Windows Server* Operating System During the Microsoft Windows Server* operating system installation: To install the RAID controller driver when installing the Microsoft Windows Server* operating system: 1. Boot the computer using the Windows® Server installation DVD. The Windows® Server Operating System Setup starts. Figure 141. Microsoft Windows Server* Setup Menu 2. When prompted, Press to install a third-party driver. 94 Intel® Server System SR1670HV Service Guide
![](/manual_guide/products/intel-sr1670hv-service-guide-3ca2ac9/109.png)