Intel SR1670HV Service Guide - Page 41
Attaching the Rack Rails
![]() |
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing the Rackmount Rail Kit Figure 37. Attaching the Front End of the Server Rail to Side of Chassis 2. Attach the rear end of the server rail to the side of the chassis, matching each of the two hooks to the hooks to the holes on the rail, and then slide the rail towards the front panel until it locks into place. Figure 38. Sliding the Server Rail 3. Secure the server rail to the side of the chassis with two screws. Figure 39. Securing the Server Rail With Screws 4. Repeat steps 1 through 3 to attach the second server rail to the other side of the chassis. 3.2 Attaching the Rack Rails To attach the rack rails: 1. Select one unit of space (1U) on the rack where you want to install the server system. 2. Install the nuts on the holes of the 1U space on the rack front. 3. Install the nuts on the holes of the 1U space on the corresponding rack rear. 4. Measure the depth of the rack to determine the length of the rack rails. 5. Measure the rack rail when assembled to ensure it fits the rack. 6. Position the rack rail to the 1U space on the rack. Ensure the front end of the rack rail goes to the front of the rack space. 26 Intel® Server System SR1670HV Service Guide
![](/manual_guide/products/intel-sr1670hv-service-guide-3ca2ac9/41.png)