Intel SR1670HV Service Guide - Page 46
Connected Cables and Backplane Expose, Front Panel Cables
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
System Service 5. Carefully rotate back and place the connected HDD bay module on top of the system fan assembly so all connected cables and backplane are exposed. Figure 51. Connected Cables and Backplane Expose 6. Note the location and connector type of each cable you must disconnect from the backplane. Disconnect all cables from the backplane and remove the bundled cables from the latched plastic cable holders. 7. Place the HDD bay module onto a static-free surface. 8. The backplane is fastened to the HDD bay module using 12 screws. Remove all screws from the backplane. 9. Carefully pull back the backplane to expose the front panel cables connected to it. Figure 52. Front Panel Cables 10. Note the location of each of the four front panel cables and disconnect each from the backplane. TIP Label each 8-pin x 16-pin cable pair before disconnecting them from the backplane. Make sure you reconnect each cable pair to the correct backplane connectors. 11. Unpack the replacement backplane. 12. Reconnect the front panel cable pairs to the correct connectors on the backplane. Intel® Server System SR1670HV Service Guide 31