Intel SR1670HV Service Guide - Page 59
Auxiliary Panel Connector 20-pin AUX_PANEL1
![]() |
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Jumpers, Connectors, and LEDs 5.2.10 Auxiliary Panel Connector (20-pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. Figure 74. Auxiliary Panel Connector 5.2.10.1 Front panel SMB (6-1 pin FPSMB) These leads connect the front panel SMBus cable. 5.2.10.2 LAN activity LED (2-pin LAN1_LED, LAN2_LED) These leads are for Gigabit LAN activity LEDs on the front panel. 5.2.10.3 Chassis intrusion (4-1 pin CHASSIS) These leads are for the intrusion detection feature for chassis with intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to these leads to record a chassis intrusion event. The default setting is short CASEOPEN and GND pin by jumper cap to disable the function. 5.2.10.4 System ID LED (2-pin LOCATORLED1 and 2-pin LOCATORLED2) These leads are for the locator LED1 and LED2 on the front panel. Connect the Locator LED cables to this 2-pin connector. The LEDs will light up when the Locator button is pressed. 5.2.10.5 System ID Button/Switch (2-pin LOCATORBTN) These leads are for the locator button on the front panel. This button queries the state of the system locator. 44 Intel® Server System SR1670HV Service Guide
![](/manual_guide/products/intel-sr1670hv-service-guide-3ca2ac9/59.png)