Intel SR1670HV Service Guide - Page 96
Embedded SATA RAID
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Embedded SATA RAID 7. Embedded SATA RAID This section provides an overview of the SATA Software RAID options embedded on the server board. It describes how to enable the RAID feature and configure RAID sets using either of the two SW RAID Configuration Utilities. For more in-depth RAID information including definitions, setup, and support, refer to the respective SATA SW RAID Users Guides included on the System Resource CD, or download them from the following Intel website: http://support.intel.com/support/motherboards/server/SR1670HV/ 7.1 Selecting a RAID option Embedded on the server board are options to support either of two SATA Software RAID options: LSI* SATA Software RAID (default) with support for RAID levels 0, 1, and 10 with drivers to support both Linux* and Microsoft Windows* operating systems. Intel® Matrix Storage Manager with support for RAID levels 0, 1, 10, and 5 with drivers to support Microsoft Windows* operating systems only. By default, the server board is configured to support the LSI SATA Software RAID option. To change options, you must move a jumper block on the server board. The following diagram shows the location of the jumper block and its settings. 1 1 2 2 3 3 LSI Intel (Default) Figure 119. RAID Option Jumper Block Intel® Server System SR1670HV Service Guide 81