Intel SR1670HV Service Guide - Page 29

Removing the Processor Heatsink

Get Intel SR1670HV - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Hardware Setup 3 2 Air Flow 1 4 TIM Chassis Front AF002841 Figure 18. Installing the Heatsink (Passive Heatsink Shown) 2.2.3 Removing the Processor Heatsink To remove or replace a processor, you must first remove the heatsink. CAUTION Improper removal can damage the heatsink. Pay close attention to the steps and perform each step exactly as indicated to avoid damage. To remove the heatsink, follow these steps: 1. Loosen the four captive screws on the heatsink corners in a diagonal manner according to the numbers shown in Figure 19 as follows: a. Starting with the screw at location 1, loosen it by giving it two rotations in the counter-clockwise direction and stop. (IMPORTANT: Do not loosen fully.) b. Proceed to the screw at location 2 and loosen it by giving it two rotations and stop. c. Loosen screws at locations 3 and 4 by giving each screw two rotations and then stop. d. Repeat steps 3a through 3c by giving each screw two rotations each time until you loosen all screws. 2. Twist the heatsink slightly to break the seal between the heatsink and the processor. 3. Lift the heatsink from the processor. If it does not pull up easily, twist the heatsink again. Do not force the heatsink from the processor. Doing so could damage the processor. 14 Intel® Server System SR1670HV Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
Hardware Setup
14
Intel
®
Server System SR1670HV Service Guide
2
3
1
4
TIM
Air Flow
Chassis Front
AF002841
Figure 18. Installing the Heatsink (Passive Heatsink Shown)
2.2.3
Removing the Processor Heatsink
To remove or replace a processor, you must first remove the heatsink.
CAUTION
Improper removal can damage the heatsink. Pay close attention to the
steps and perform each step exactly as indicated to avoid damage.
To remove the heatsink, follow these steps:
1.
Loosen the four captive screws on the heatsink corners in a diagonal manner
according to the numbers shown in Figure 19 as follows:
a.
Starting with the screw at location 1, loosen it by giving it two rotations in the
counter-clockwise direction and stop. (
IMPORTANT:
Do not loosen fully
.
)
b.
Proceed to the screw at location 2 and loosen it by giving it two rotations and stop.
c.
Loosen screws at locations 3 and 4 by giving each screw two rotations and then
stop.
d.
Repeat steps 3a through 3c by giving each screw two rotations each time until you
loosen all screws.
2.
Twist the heatsink slightly to break the seal between the heatsink and the processor.
3.
Lift the heatsink from the processor. If it does not pull up easily, twist the heatsink
again. Do not force the heatsink from the processor. Doing so could damage the
processor.