Intel SR1670HV Service Guide - Page 30
System Memory - overview
![]() |
UPC - 735858210034
View all Intel SR1670HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Hardware Setup Figure 19. Removing the Heatsink NOTE: Tighten the four heatsink screws in a diagonal sequence. 2.3 System Memory 2.3.1 Overview Each installed server node supports twelve (12) DDR3 DIMM sockets-six for each installed processor. NOTE: You should only install memory in DIMM sockets DIMM_D1 through DIMM_F2 when dual processors are installed on a given server node. On a given server node, DIMM sockets DIMM_D1 through DIMM_F2 are not enabled in single processor configurations. The following figure illustrates the location of the DDR3 DIMM sockets. Intel® Server System SR1670HV Service Guide 15
![](/manual_guide/products/intel-sr1670hv-service-guide-3ca2ac9/30.png)
Hardware Setup
Intel
®
Server System SR1670HV Service Guide
15
Figure 19. Removing the Heatsink
NOTE:
Tighten the four heatsink screws in a diagonal sequence.
2.3
System Memory
2.3.1
Overview
Each installed server node supports twelve (12) DDR3 DIMM sockets—six for each
installed processor.
NOTE:
You should only install memory in DIMM sockets DIMM_D1 through DIMM_F2 when
dual processors are installed on a given server node. On a given server node, DIMM sockets
DIMM_D1 through DIMM_F2 are not enabled in single processor configurations.
The following figure illustrates the location of the DDR3 DIMM sockets.