Intel SR1670HV Service Guide - Page 44

Replacing System Fans

Page 44 highlights

System Service 4.2 Replacing System Fans To uninstall the system fans: CAUTION Verify the system is powered off before removing any system fan from the system. The system fans operate at very high speeds and may cause serious injury. 1. Disconnect the system fan cable from the fan connector on the server board. Figure 45. Disconnecting System Fan Cable 2. Lift the fan and set it aside. Figure 46. Lifting System Fan 3. Repeat Steps 1 and 2 to uninstall other system fans. To reinstall a system fan: 1. Insert the fan into the fan cage. The airflow directional arrow on the fan side should point towards the system rear panel. Figure 47. Inserting Fan Into the Fan Cage 2. Connect the system fan cable to the fan connector on the server board. Intel® Server System SR1670HV Service Guide 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157

System Service
Intel
®
Server System SR1670HV Service Guide
29
4.2
Replacing System Fans
To uninstall the system fans:
CAUTION
Verify the system is powered off before removing any system fan
from the system. The system fans operate at very high speeds
and may cause serious injury.
1.
Disconnect the system fan cable from the fan connector on the server board.
Figure 45. Disconnecting System Fan Cable
2.
Lift the fan and set it aside.
Figure 46. Lifting System Fan
3.
Repeat Steps 1 and 2 to uninstall other system fans.
To reinstall a system fan:
1.
Insert the fan into the fan cage. The airflow directional arrow on the fan side should
point towards the system rear panel.
Figure 47. Inserting Fan Into the Fan Cage
2.
Connect the system fan cable to the fan connector on the server board.