Intermec 6822 6820 Series 80-Column Printer User Manual (for printers purchase - Page 137
Manage Security Modes, S4MyPinCode <CR>
View all Intermec 6822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Appendix B - Bluetooth Configuration Commands and Specifications Example: "S4MyPinCode " Manage Security Modes This command controls the security access mode and device pairing. The modes available are: • L0 Disable encryption, authentication and exclusion • L1 Enable authentication • L2 Enable encryption and authentication • L3 Enable encryption, authentication and exclusive Mode L0 allows any remote device to connect. Mode L1 require the remote device to be authenticated by a PIN request. The PIN code for the module is set to a user-specified value with the S4 command. Currently the default PIN is the NULL string. Mode L2 adds encryption to the Bluetooth link. Mode L3 adds exclusive connection to one specific Bluetooth device. In this mode only connection requests from the initial device are allowed. Connections from other devices are rejected even if they supply the correct PIN code. Device pairing and bonding are associated with this command and works as follows: After an L command is executed the current device pairing and bonding is deleted. The next device to connect becomes paired and bonded to the module. In Modes L1 and L2, other devices are allowed to connect but only the first device to connect is paired and bonded. Other devices are always required to supply a PIN code to complete the connection. In Mode L3, only one device is allowed to connect. This device is paired and bonded and needs to supply the PIN code only on the initial connection. Note: Some of the Bluetooth user interfaces cannot supply a NULL string as a PIN code. Use the S4 command to specify a PIN code that is not NULL. 6820 Series 80-Column Printer User Manual 121