Intermec 6822 6820 Series 80-Column Printer User Manual (for printers purchase - Page 30
Adjusting the Pinfeed Holders
View all Intermec 6822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 2 - Installing the 6820 Printer To position the paper 1 Open the pinfeed holders outward. 1 3 4 2 5 2 Take the top edge of the sheet of paper and position it, original side facing down, over the pinfeed holder pins. 3 Align the first few holes of the paper evenly on each side. 4 Close the pinfeed holders. 5 Raise the paper bail. Adjusting the Pinfeed Holders Note: There are two pinfeed holders, one next to the green thumbwheel and one opposite the green thumbwheel. Always loosen the pinfeed holder opposite the green thumbwheel. Note: Adjusting the pinfeed holder next to the green thumbwheel may cause information to print in the wrong place. If this pinfeed holder is moved, correct its location by releasing the pinfeed holder tab, moving the pinfeed holder as close to the green thumbwheel as possible, then locking the pinfeed holder tab, before adjusting the opposite pinfeed holder. 14 6820 Series 80-Column Printer User Manual