Intermec 6822 6820 Series 80-Column Printer User Manual (for printers purchase - Page 76
Select National Character Set, Format
View all Intermec 6822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 4 - Control Code Definitions Select National Character Set By default, code page 0 is selected by the printer at reset. Use the following escape sequence to select international character support. Escape sequence codes can only be used for code page 0. All other code pages use direct character code mapping to select the appropriate font for rendering. n is 0 to 14 and is the country code, as shown in the International Character Sets table. The default value for n is zero (USA). Format Decimal 27 82 n Hex 1B 52 n ASCII ESC "R" n A full 256 character set is not provided for these sets. There are 64 international characters stored in ROM, 32 in Roman and 32 in Italic. They are stored as codes 0 to 31 and 128 to 255. These are normally not accessible. The ESC "R" command makes these codes available, but only 12 characters at a time. These 12 are available in these positions of the ASCII character table: 35, 36, 64, 91, 92, 93, 94, 96, 123, 124, 125, and 126, as shown in the International Character Sets table. International Character Sets Country USA France Germany England (UK) Denmark 1 Sweden Italy Spain 1 Japan Norway Country Number 35 36 64 91 92 93 94 96 123 124 125 126 0 1 2 b 3 4 5 6 èì 7 P 8 9 60 6820 Series 80-Column Printer User Manual